airVentDisplay
×
 x 

0 products
%PM, %05 %903 %2017 %21:%Dec

Analog2CAN

Analog2CAN modules for reading pressure sensors (0-5V) and temperature sensor (RTD/PTC) are developed.

The modules transmits the measured data onto the CAN bus. Typically application is to attach one module for reading the brake pressures on the MK60 ABS as well as the oil pressure on the S54 engine and transmit the data by custom CAN messages. The brake pressure sensors are already on the MK60, but one need to install an oil pressure sensor in the spare input close to the oil pressure switch. For the gear box temp there will be one Analog2CAN module reading the temperature and transmit the data onto the CAN bus by a custom CAN messages. The same for the diff temperature.

airVent Display solutions

Discover the amazing amount of information available on the E46 CAN bus, made easily available via a touch screen embedded in the E46 air vent console.

 

FIND OUT MORE SHOP TODAY!

MK60 emulator solutions

Enable the MK60 CAN bus data stream in a non-standard E46 configuration, made available by a dedicated custom made MK60 emulator.

 

FIND OUT MORE SHOP TODAY!


TOP